Cutting roll paper, Attaching the belt clip, 1cutting roll paper – Brother RJ-4040 User Manual
Page 11
Advertising
Setting Up the Printer
7
1
Cutting Roll Paper
1
Roll paper can be cut using the printer's tear
bar. Pull one edge of the ejected paper up
and toward the other edge diagonally.
Attaching the Belt Clip
1
When using the printer outside the office, you
can attach the included belt clip to the printer
and secure the belt clip to your belt.
a
Secure the Phillips-head screws to the
rear of the printer as shown.
1 Belt clip
2 Phillips screw
b
Attach the clip to your belt.
The tear bar is sharp. To avoid injury, do
not touch the tear bar.
2
1
Advertising
This manual is related to the following products: