Brother MFC-8950DWT - Manual (Page 6)

6
c
Fan the stack of paper well to avoid paper jams
and misfeeds.
d
Put the paper in the tray and make sure:
 The paper is below the maximum paper
mark (bbb) a.
Over filling the paper tray will cause paper
jams.
 The side to be printed on is face down.
 The paper guides touch the sides of the
paper so it will feed properly.
e
Put the paper tray firmly back in the machine.
Make sure that it is completely inserted into the
machine.
f
Lift up the support flap a to prevent paper from
sliding off the face-down output tray.
4
Connect the power cord
and telephone line
a
Connect the AC power cord to the machine and
then plug it into an AC power outlet.
b
Turn the machine’s power switch on.
c
Connect the telephone line cord. Connect one
end of the telephone line cord to the jack on the
machine marked LINE and the other end to a
modular wall jack.
For more information about recommended
paper, see Recommended paper and print
media in the Basic User's Guide.
Important
DO NOT connect the interface cable
yet.
Important
DO NOT touch the Touchscreen immediately
after plugging in the power cord or turning the
machine on. Doing this may cause an error.
Important
The telephone line cord MUST be connected to
the jack on the machine marked LINE.