Brother HL 5370DW - Manual (Page 24)

24
Windows
® Wireless Network
Configuration in Infrastructure mode, using the Brother installer
application
8
Configure the wireless settings
You must know your wireless network settings before you proceed with this installation.
Make sure you take notes on all the current settings such as SSID, authentication and encryption of your wireless
network environment. If you do not know them, contact your network administrator or the manufacture of your
access point/router.
1 WPA/WPA2-PSK is a Wi-Fi Protected Access Pre-Shared Key, which lets the Brother wireless machine associate with access points using
TKIP or AES encryption (WPA-Personal). WPA/WPA2-PSK (TKIP or AES) uses a Pre-Shared Key (PSK) that is 8 or more characters in
length, up to a maximum of 63 characters.
2 The WEP key is for 64-bit encrypted networks or 128-bit encrypted networks and can contain both numbers and letters. If you do not know
this information you should see the documentation provided with your access point or wireless router. This key is a 64-bit or 128-bit value
that must be entered in an ASCII or HEXADECIMAL format.
a
Make sure the printer power switch is on.
b
Turn on your computer. (You must be logged
on with Administrator rights.)
c
Put the supplied CD-ROM into your CD-ROM
drive. The opening screen will appear
automatically.
Choose your printer model and the language.
Item Example Record the current wireless network settings
Communication mode: (Infrastructure) Infrastructure
Network name: (SSID, ESSID) HELLO
Authentication method:
(Open System, Shared key, WPA-PSK 1 ,
WPA2-PSK 1 , LEAP, EAP-FAST)
WPA2-PSK
Encryption mode:
(None, WEP,TKIP, AES, CKIP)
AES
Network key:
(Encryption key, WEP key 2 , Passphrase)
12345678
For example:
64-bit ASCII: Uses 5 text characters e.g. “Hello” (this is case sensitive)
64-bit Hexadecimal: Uses 10 digits of hexadecimal data e.g. “71f2234aba”
128-bit ASCII: Uses 13 text characters e.g.
“Wirelesscomms” (this is case sensitive)
128-bit Hexadecimal: Uses 26 digits of hexadecimal data e.g.
“71f2234ab56cd709e5412aa3ba”
IMPORTANT
You need to temporarily use an Ethernet cable during configuration (cable not included).