5 check the print quality, Check the print quality – Brother MFC-J4310DW User Manual

Page 7

Advertising
background image

7

5

Check the print quality

a

When the preparation process has finished, the
Touchscreen shows Set Paper and Press
Start.
Press Start.

b

Check the quality of the four color blocks on the
sheet. (black/yellow/cyan/magenta)

c

If all lines are clear and visible, press Yes to
finish the quality check and go to the next step.

If you can see missing short lines, press No and
follow the steps on the Touchscreen.

IMPORTANT

• DO NOT take out ink cartridges if you do not

need to replace them. If you do so, it may
reduce the ink quantity and the machine will not
know the quantity of ink left in the cartridge.

• DO NOT repeatedly insert and remove the

cartridges. If you do so, ink may seep out of the
cartridge.

• If you mix the colors by installing an ink

cartridge in the wrong position, clean the print
head several times after correcting the
cartridge installation. (See
Cleaning the print
head in Appendix A of the Basic User’s Guide.)

• Once you open an ink cartridge, install it in the

machine and use it up within six months of
installation. Use unopened ink cartridges by
the expiration date written on the cartridge
package.

• DO NOT dismantle or tamper with the ink

cartridge, this can cause the ink to leak out of
the cartridge.

• Brother strongly recommends that you do not

refill the ink cartridges provided with your
machine. We also strongly recommend that
you continue to use only Genuine Brother
Brand replacement ink cartridges. Use or
attempted use of potentially incompatible ink
and/or cartridges in the Brother machine may
cause damage to the machine and/or may
result in unsatisfactory print quality. Our
warranty coverage does not apply to any
problem that is caused by the use of
unauthorized third party ink and/or cartridges.
To protect your investment and obtain premium
performance from the Brother machine, we
strongly recommend the use of Genuine
Brother Supplies.

NOTE

Make sure you put paper in the paper tray (for
MFC-J4610DW, tray #1, the upper tray) for the
initial setup.

OK

Poor

Advertising
This manual is related to the following products: