Brother PT-2410 - Manual (Page 97)

93
HORIZONTAL ALIGNMENT FUNCTION
You can choose to align lines of text in one of three ways. In addition, if the Length function
was used to set the length of the label, the text will align within the label according to the
selected horizontal alignment setting.
The default horizontal alignment setting is LEFT; however, two other settings are also avail-
able.
To change the horizontal alignment setting:
1 While holding down , press once, and keep held down to display the
current horizontal alignment setting.
2 While still holding down , continue pressing until the desired horizontal
alignment setting is displayed.
3 Release to apply the selected horizontal alignment setting to the entire text.
EXAMPLE
LEFT CENTER RIGHT
To select the RIGHT horizontal alignment setting:
1 While holding down , press
once, and keep held down.
2 While still holding down , con-
tinue pressing until RIGHT is dis-
played.
3 Release .
Code Code
Align
R
Align
R Code Code
Code Code
Align
R
Align
R
Code Code
L E F T
H . A L I G N M E N T Alt
Caps
Width
Length
A.Format
Undl/Frm
Length
Code Code
Align
R
Align
R
Code Code
R I G H T
H . A L I G N M E N T Alt
Caps
Width
Length
A.Format
Undl/Frm
Length
Code Code
Align
R
Align
R
Code Code