Brother MFC-8950DWT - Manual (Page 10)

7
Introduction
1
Registering and deleting accounts on the machine
1
Enter the account information and configure the machine so that it can access the service.
Register an account
1
a
Before you begin to register an account please confirm the correct time zone, date and time are set on
the control panel of the machine. Please see the Quick Setup Guide included with your machine for
instructions on setting the correct time zone, date and time.
b
Press Web on your machine’s LCD.
If a message regarding your Internet connection is displayed, press OK. You will be asked if you want to
display this information again in the future. Press Yes or No.
Note
If there are announcements about new features, and so on, the latest information will be displayed. Read
the information and press OK.
c Choose the desired service.
d If information regarding Brother Web Connect is displayed, press OK.
e Press Register/Delete Account.
f Press Register Account.
g
A message is displayed prompting you to enter the temporary ID you received when you applied for
Brother Web Connect access.
Press OK.
h Enter the temporary ID by using the buttons on the LCD.
Press OK.
i A message is displayed prompting you to enter a name for the account as you want it to be displayed on
the LCD.
Press OK.
j
Enter the name by using the buttons on the LCD.
Press OK.
k
Do one of the following:
 If you want to set a PIN code for the account, press Yes. Then enter a four-digit number and press
OK
. (The PIN code prevents unauthorized access to the account.)
 If you do not want to set a PIN code, press No.