Brother PT-2600 - Manual (Page 100)

93
EXAMPLE
This function prints your label so that the text can be read from the adhesive side of the tape. If
mirror-printed labels are attached to glass or some other transparent material, they can be read
correctly from the opposite side.
☞
When using the Mirror printing function, the text should be printed on CLEAR TAPE.
The default mirror printing setting is OFF.
To change the mirror printing setting:
1 While holding down
c, press p once, and keep c held down to display the cur-
rent mirror printing setting.
2 While still holding down c, continue pressing p until the desired mirror printing set-
ting is displayed.
3 Release c to apply the selected mirror printing setting to the entire text.
To select the RIGHT horizontal alignment setting:
1 While holding down
c
, press
R
once, and
keep
c
held down.
2 While still holding down
c
, continue pressing
R
until RIGHT is displayed.
3 Release
c
.
When the Mirror printing
function is set to ON:
L E F T
A L I G N
R I G H T
A L I G N
TZ-T
ape
AV
-Label
MIRROR PRINTING FUNCTION