Gateway – Brother MFC 7840W User Manual

Page 27

Advertising
background image

Control panel setup

20

3

d

Press a or b to choose TCP/IP.

Press OK.

e

Press a or b to choose Subnet Mask.

Press OK.

f

Press 1 to choose Change.

g

Enter the Subnet Mask address.
Press OK.

h

Press Stop/Exit.

Gateway

3

This field displays the current gateway or router address used by the machine. If you are not using DHCP or
BOOTP to obtain the gateway or router address, enter the address you wish to assign. If you do not have a
gateway or router, leave this field blank. Check with your network administrator if you are unsure.

a

Press Menu.

b

Press a or b to choose LAN.

Press OK.
(MFC-7440N and MFC-7840N) Go to d.
(MFC-7840W) Go to c.

c

(MFC-7840W only)
(For Wired) Press a or b to choose Wired.

(For Wireless) Press a

or b to choose WLAN.

Press OK.

d

Press a or b to choose TCP/IP.

Press OK.

e

Press a or b to choose Gateway.

Press OK.

f

Press 1 to choose Change.

g

Enter the Gateway address.
Press OK.

h

Press Stop/Exit.

Advertising
This manual is related to the following products: