Brother MFC-J875DW - Manual (Page 16)

13
4
4
Wi-Fi Direct™ network terms
4
Group Owner (G/O)
4
If you set Group Owner to On, your Brother machine serves as an access point when you configure a
Wi-Fi Direct™ network. The G/O assigns an SSID name, password and IP address for the Wi-Fi Direct™
network. The default setting is Off.
Device Information
4
Device Name
4
You can check the Brother machine's device name in the Wi-Fi Direct™ network environment. The device
name will be shown as MFC-XXXX or DCP-XXXX (where XXXX is your model name).
SSID
4
This field displays the current Wi-Fi Direct™ network SSID name. The display shows up to 32 characters of
the SSID name.
IP Address
4
This field displays the current IP address of the machine, as assigned by the G/O.
Status Information
4
Status
4
This field displays the current Wi-Fi Direct™ network status. When your machine is a G/O, it displays the
message G/O Active(**) (where ** is the number of devices). When your machine is a client, the machine
displays the message Client Active. If the machine displays Off, your machine’s Wi-Fi Direct™
interface is disabled.
Signal
4
This field displays the current Wi-Fi Direct™ network signal strength.
Channel
4
This field displays the current Wi-Fi Direct™ network channel.
Speed
4
This field displays the current Wi-Fi Direct™ network speed.
I/F Enable
4
If you want to use the Wi-Fi Direct™ network connection, set I/F Enable to On.
Glossary
4