Resetting the belt counter – Brother HL-L8350CDWT User Manual
Page 147
Advertising
Routine Maintenance
140
5
j
Push the drum unit in until it stops.
k
Close the front cover of the machine.
Resetting the belt counter
When you replace the belt unit with a new one, you must reset the belt unit counter by completing the
following steps:
a
Press a while holding down Go on the machine's control panel.
b
Press a or b ( + or -) to display Belt Unit. Press OK.
c
Press a for Reset to reset the belt unit counter.
Advertising
This manual is related to the following products: