Printer driver already installed, 7printer driver already installed – Brother MFC-J410W User Manual
Page 95
Network printing from Windows
®
basic TCP/IP Peer-to-Peer printing
88
7
Printer driver already installed
7
If you have already installed the printer driver and wish to configure it for network printing, follow these steps:
a
(Windows
®
7)
Click the
button, Control Panel, Hardware and Sound, and then Device and Printers.
(Windows Vista
®
)
Click the
button, Control Panel, Hardware and Sound, and then Printers.
(Windows Server
®
2008)
Click the Start button, Control Panel, Hardware and Sound, and then Printers.
(Windows
®
XP and Windows Server
®
2003)
Click the Start button and choose Printers and Faxes.
(Windows
®
2000)
Click the Start button and choose Settings and then Printers.
b
(Windows
®
7)
Choose the printer driver you wish to configure, and then click Print server properties from the menu.
(Other Windows
®
Operating Systems)
Right click on the printer driver you wish to configure, and then choose Properties.
c
Click the Ports tab and click Add Port.
d
Choose the port that you wish to use. Typically this would be Standard TCP/IP Port. Then click the
New Port... button.
e
(Windows
®
7)
The Add Standard TCP/IP Printer Port Wizard will start.
(Other Windows
®
Operating Systems)
The Standard TCP/IP Port Wizard will start.
f
Enter the IP address of your network printer. Click Next.
g
Click Finish.
h
(Windows
®
7)
Close Printer Ports and Printer Server Properties dialog box.
(Other Windows
®
Operating Systems)
Close Printer Ports and Properties dialog box.