Brother MFC-845CW User Manual
Brother Multifunction Devices
Advertising
STEP 1
STEP 2
Setup is Complete!
Qu
ick
Se
tu
p G
u
id
e
Installing the Driver & Software
MFC-845CW
Before you can use the machine, you must set up the hardware and install the software.
Please read this Quick Setup Guide for the correct setup procedure and installation instructions.
Keep this Quick Setup Guide, the User’s Guide and the supplied CD-ROM in a convenient place for
quick and easy reference at all times.
Advertising
Table of contents
Document Outline
- Quick Setup Guide MFC-845CW
- Symbols used in this guide
- Table of Contents
- Getting Started
- STEP1 Setting Up the Machine
- 1 Removing the protective parts
- 2 Connecting the cradle power cord
- 3 Installing the battery
- 4 Charging the battery
- 5 Choosing a location
- 6 Position the antenna on the base unit
- 7 Loading paper
- 8 Connecting the phone line
- 9 Connecting the power cord
- 10 Installing the ink cartridges
- 11 Print quality check
- 12 Setting the LCD contrast
- 13 Setting the date and time
- 14 Setting your station ID
- 15 Setting tone or pulse dialing mode
- 16 Choosing a Receive Mode
- 17 Setting up the Message Center
- 18 Sending in the Product Registration and Test Sheet (USA only)
- STEP2 Installing the Driver & Software
- Supplied CD-ROM ‘MFL-Pro Suite’
- Windows®
- For USB Interface Users (For Windows® 98/98SE/Me/2000 Professional/XP/XP Professional x64 Edition)
- For Wired Network Interface Users (For Windows® 98/98SE/Me/2000 Professional/XP/XP Professional x64 Edition)
- For Wireless Network Users (For Windows® 98/98SE/Me/2000 Professional/XP/XP Professional x64 Edition in infrastructure mode)
- Macintosh®
- For Network Users
- Consumables
- brother USA