Brother HL 2270DW - Manual (Page 25)

21
4
4
Before configuring the wireless settings
4
IMPORTANT
• The following instructions will install your Brother machine in a network environment using the Brother
installer application found on the CD-ROM we have provided with the machine.
• If you have previously configured the wireless settings of the machine, you must reset the print server back
to its factory default settings. (see Reset the network settings to the factory default on page 26.)
• If you are using a firewall function of anti-spyware or antivirus applications, temporarily disable them. Once
you are sure that you can print please re-enable your firewall.
• You need to temporarily use a USB cable or an Ethernet (LAN) cable (For HL-2270DW and HL-2275DW)
during configuration.
• You must know your wireless network settings before you proceed with this installation.
Make sure you take notes on all the current settings such as SSID, authentication and encryption of your
wireless network environment. If you do not know them, contact your network administrator or the
manufacturer of your WLAN access point/router.
Wireless configuration using the Brother
installer application (For HL-2135W,
HL-2270DW and HL-2275DW)
4