Brother MFC-J4510DW - Manual (Page 50)

44
7
Copy options
7
You can change the copy settings for the next
copy.
These settings are temporary. The machine
returns to its default settings 1 minute after
copying.
Press Copy and then press Options. Swipe
up or down, or press a or b to scroll through
the copy settings. When the setting you want
is displayed, press it and choose your
preferred option. When you finished changing
the options, press OK and then press
Black Start or Color Start.
NOTE
• You can save some of the options you use
most often by setting them as a Shortcut.
(See Saving copy options as a Shortcut
on page 55.)
• The Ink Save Mode,
Thin Paper Copy, Book Copy and
Watermark Copy features are
supported by technology from Reallusion,
Inc.
Stop copying
7
To stop copying, press .
Changing copy quality
7
You can choose the copy quality. The factory
setting is Normal.
 Normal
Normal is the recommended mode for
ordinary printouts. This produces good
copy quality with good copy speed.
NOTE
If you choose Normal, you can only
choose Plain Paper in Paper Type.
 Best
Use Best mode to copy precise images
such as photographs. This provides the
highest resolution and slowest speed.
a
Load your document.
b
Press Copy.
c
Enter the number of copies you want.
d
Press Options.
e
Swipe up or down, or press a or b to
display Quality.
f
Press Quality.
g
Press Normal or Best.
h
Press OK.
i
If you do not want to change additional
settings, press Black Start or
Color Start.
Making copies
7