Brother HL-1870N - Manual (Page 60)

CHAPTER 5 BIP INTERNET PRINTING INSTALLATION
5-7
Brother Internet Print
Installing the BIP software on
Windows 95/98/Me/NT4.0/2000/XP
To install the BIP software on a Windows 95/98/NT4.0/2000/XP PC, execute the
following steps:
• Be sure that the PC is running an E-mail program (for example,
Microsoft Outlook) that is capable of sending E-mail message using
Winsock.
• Be sure that your E-mail server is capable of sending messages across
the Internet.
Setup from CD-ROM
1. Start the CD-ROM installation menu program according to the Quick
Setup guide
2. Select the proper Model and Software Installation menu. Then select the
Network Print Software menu to start the Brother Network Print
Software installation program.
3. Push the Next button in response to the Welcome message.
4. Select the Brother Internet Print button.
5. Select the desired directory to install the BIP files and then push Next.
The installation program will create the directory for you if it does not
already exist.
6. You will then be asked for a port name. Enter the name of the port. The
port name must begin with the BIP and end with a number, for example,
BIP1.
7. You will then see a message about Partial E-mail Print. Partial E-mail
Print is the ability of the Brother Internet Print software to break down
E-mail Print jobs into smaller sections to prevent a mail file size
limitation problem for mail server.
8. Press OK to continue.
9. You will then be asked to enter the port settings for the remote print
server:
Enter any unique legal Internet E-mail address for the remote print
server (for example [email protected]). Note that Internet E-mail
addresses cannot have spaces in them.
Enter your E-mail address and the IP address of your SMTP E-mail
server (consult your network administrator if you do not know this
address). Also specify if you are going to use the Partial E-mail Print
option and Notification type.
10. Press OK to continue. You will then be asked to re-start your computer.