Brother HL-1870N - Manual (Page 78)

CHAPTER 6 NOVELL NETWARE PRINTING
6-14
Configuring the Brother Print Server
(Queue Server Mode in NDS mode)
using PCONSOLE and BRCONFIG
1. Make sure that you are logged in as ADMIN in NDS mode on the
NetWare 4.1x file server.
2. Run the PCONSOLE utility from PC workstation.
3. Select print servers from the Available Options menu.
4. Press INSERT and enter the print server name
Enter the NetWare print service name of the print server exactly as it appeared in
the printer configuration page (the default name is BRN_xxxxxx_P1, where
"xxxxxx" is the last six digits of the Ethernet address (MAC address), unless you
changed the name to something else). You can find the NetWare print service
name and MAC address by printing out the printer configuration page. Refer to
the User’s Guide for information on how to print the configuration page on your
print server.
Important:
Do not assign a password to the print server or it will not log in.
5. Return to the main Available Options menu by pressing ESCAPE.
6. Select Print Queues.
7. Press INSERT type in the desired print queue name (you will also be
asked for a volume name. Press INSERT and select the appropriate
volume), and press ESCAPE to return to the main menu.
8. Make sure that the new queue name is highlighted, and press ENTER.
9. Select print servers and press ENTER to specify which network print
servers can print jobs from this print queue. The list will be empty, since
none have been selected.
10. Press INSERT to get a list of the queue server candidates and select the
NetWare print server name from step 4, which will then be added to the
list. Press ENTER.
11. Select Printers from the Available Options menu.
12. Press INSERT and enter a descriptive name for the printer.
13. Press ESCAPE and go back to the Available Options menu.
14. Select print servers and select the name of the printer server that you
entered in Step 4.