Brother MFC-7820N - Manual (Page 38)

Chapter 2
2 - 5
Setting the Beeper Volume
You can change the beeper volume. The
default setting is Med. When the beeper is on,
the MFC will beep when you press a key,
make a mistake, or after you sent or received
a fax.
1
Press Menu/Set, 1, 4, 2.
2
Press
▲ or ▼ to select Low, Med, High
or Off.
Press Menu/Set.
3
Press Stop/Exit.
Setting the Speaker Volume
You can adjust the MFC’s one-way speaker
volume.
1
Press Menu/Set, 1, 4, 3.
2
Press
▲ or ▼ to select Low, Med, High
or Off.
Press Menu/Set.
3
Press Stop/Exit.
—OR—
In Fax mode , you can adjust the
speaker volume by pressing Hook, and then
selecting a speaker volume level.
Press or to adjust the volume
level. The LCD shows the setting you are
choosing. Each key press changes the
volume to the next setting. The new setting
will remain until you change it again.
Turning on Automatic
Daylight Savings Time
You can set the MFC to change automatically
for Daylight Savings Time. It will reset itself
forward one hour in the Spring and backward
one hour in the Fall. Make sure you have set
the correct day and time in the Date/Time
setting.
1
Press Menu/Set, 1, 5.
2
Press ▲ or ▼ to select On (or Off).
Press Menu/Set.
3
Press Stop/Exit.
Toner Save
You can conserve toner using this feature.
When you set Toner Save to On, print
appears lighter. The default setting is Off.
1
Press Menu/Set, 1, 6, 1.
2
Press ▲ or ▼ to select On (or Off).
Press Menu/Set.
3
Press Stop/Exit.
Volume
2.Beeper
Volume
3.Speaker
▲ ▲
General Setup
5.Auto Daylight
Ecology
1.Toner Save