Brother MFC-255CW - Manual (Page 137)

Troubleshooting and Routine Maintenance
123
B
e
For 600 dpi, press the number of the test
print that most closely matches the
number 0 sample (1-8).
600dpi Adjust
Select Best #5
f
For 1200 dpi, press the number of the
test print that most closely matches the
number 0 sample (1-8).
1200dpi Adjust
Select Best #5
g
Press Stop/Exit.
Checking the ink volume
B
You can check the ink that is left in the
cartridge.
a
Press Menu, 8, 3.
b
The LCD shows the ink volume.
c
Press a or b to choose the color you
want to check.
d
Press Stop/Exit.
Note
You can check the ink volume from your
computer. (See Printing for Windows
®
or
Printing and Faxing for Macintosh in the
Software User's Guide on the CD-ROM.)
Machine Information
B
Checking the serial number
B
You can see the machine’s serial number on
the LCD.
a
Press Menu, 7, 1.
1.Serial No.
XXXXXXXXX
b
Press Stop/Exit.
Reset functions
B
The following reset functions are available:
1 Network
You can reset the print server back to its
default factory settings such as the
password and IP address information.
2 Speed Dial&Fax
Speed Dial resets the following settings:
„ Speed Dial
(Speed-Dial and Setup Groups)
„ Station ID
(Name and Number)
„ Report settings
(Transmission Verification Report,
Quick Dial List and Fax Journal)
3 All Settings
You can reset all the machine settings
back to the settings that were set at the
factory.
Brother strongly recommends you use this
operation when you dispose of the
machine.
Note
Unplug the interface cable before you
choose Network or All Settings.