Brother MFC-255CW - Manual (Page 138)

124
How to reset the machine
B
a
Press Menu, 0, 7.
b
Press a or b to choose the reset you
want.
Press OK.
c
Press 1 to reset the machine or press 2
to exit from the reset function.
Packing and shipping
the machine
B
When you transport the machine, use the
packing materials that came with your
machine. If you do not pack the machine
properly, any damage that may occur in
transit will not be covered by your warranty.
IMPORTANT
It is important to allow the machine to
‘park’ the print head after a print job. Listen
carefully to the machine before
unplugging it to make sure that all
mechanical noise has stopped. Not
allowing the machine to finish this parking
process may lead to print problems and
possible damage to the print head.
a
Open the ink cartridge cover.
b
Press the lock release lever to release
the ink cartridge and take out all the ink
cartridges. (See Replacing the ink
cartridges on page 116.)
c
Install the green protective part, and
then close the ink cartridge cover.