Brother MFC-L8600CDW User Manual

Quick setup guide, Unpack the machine and check the components, Remove the packing material from the machine

Advertising
background image

1

2

3

4

1

2

3

Product Safety Guide

Telephone Line Cord

For MFC models

Set the date and time

Press >

Date

Press

1.

Date.

Enter the last two digits of the year using the numbers on the Touchscreen, and then press

2.

OK.

Enter the two digits for the month using the Touchscreen, and then press

3.

OK.

Enter the two digits for the day using the Touchscreen, and then press

4.

OK.

Clock Type

Press

1.

Clock Type.

Press

2.

12h Clock or 24h Clock.

Time

Press

1.

Time.

Enter the two digits for the time using the Touchscreen.

2.

(12h Clock only)

Press

to select

AM or PM.

Press

3.

OK.

Press

4.

.

Connect the telephone line cord

NOTE:

To configure the machine for faxing, see the

Basic User's Guide.

Your machine is programmed to automatically receive faxes.

To change this default mode, see the Basic User's Guide.

Unpack the machine and check the components

Drum Unit

(pre-installed)

Toner Cartridges

(Black, Cyan, Magenta and Yellow;

pre-installed)

Waste Toner Box

(pre-installed)

Power Cord

Quick Setup Guide

Basic User’s Guide

For MFC models

CD-ROM

Belt Unit

(pre-installed)

Read the Product Safety Guide first, and then read this Quick Setup

Guide for the correct installation procedure.

NOTE:

The components included in the box and the AC power plug

connection may differ depending on your country.

The illustrations in this Quick Setup Guide are based on the

MFC-L8850CDW.

You must purchase the correct interface cable for the interface you

want to use:

USB cable

We recommend using a USB 2.0 cable (Type A/B) that is no

more than 6 feet (2 meters) long.

Network cable

Use a straight-through Category 5 (or greater) twisted-pair cable

for 10BASE-T or 100BASE-TX Fast Ethernet Network.

Press

1.

>

All Settings > Initial Setup >

Local Language

Press your language.

2.

Press

3.

.

1

Remove the packing material from the machine

2

Load paper in the paper tray

3

4

Connect the power cord and turn on

the machine

Select your language

5

Configure the machine for faxing (for MFC models)

If you do not plan to use the fax feature on this machine, go to step 6.

Adjust the paper guides.

Quick Setup Guide

DCP-L8400CDN / MFC-L8600CDW

MFC-L8850CDW / MFC-L9550CDW

The latest manuals are available at Brother Solutions Center:

http://solutions.brother.com/.

Not all models are available in all countries.

Version 0

USA/CAN

Advertising
This manual is related to the following products: