Brother HL-2170W User Manual
Network user’s guide
Advertising
NETWORK
USER’S GUIDE
Multi-Protocol On-board Ethernet Print Server and Wireless
(IEEE 802.11b/g) Ethernet Print Server
HL-2150N
HL-2170W
Please read this manual thoroughly before using the printer.
Keep the CD-ROM in a convenient place so you can use it quickly
if you need to.
Please visit us at where you can get
product support, the latest driver updates and utilities, and
answers to frequently asked questions (FAQs) and technical
questions.
Note: Not all models are available in all countries.
Version A
ENG
Advertising
Table of contents
Document Outline
- NETWORK USER'S GUIDE
- Table of Contents
- 1 Introduction
- 2 Configuring your printer for a network
- 3 Configuring the wireless network settings (For HL-2170W)
- 4 Wireless configuration for Windows® using the Brother installer application (For HL-2170W)
- 5 Wireless configuration for Macintosh® using the Brother installer application (For HL-2170W)
- 6 Wireless configuration using the one-push wireless setting mode (For HL-2170W)
- 7 Wireless configuration using the PIN Method of Wi-Fi Protected Setup™ (For HL-2170W)
- 8 Network printing from Windows®: basic TCP/IP Peer-to-Peer printing
- 9 Internet printing for Windows®
- 10 Network printing from Macintosh®
- 11 Control panel features
- 12 Security methods
- 13 Web Based Management
- 14 Driver Deployment Wizard (Windows® only)
- 15 Troubleshooting
- Appendix A
- Using services
- Other ways to set the IP address (for advanced users and administrators)
- Using DHCP to configure the IP address
- Using BOOTP to configure the IP address
- Using RARP to configure the IP address
- Using APIPA to configure the IP address
- Using ARP to configure the IP address
- Using the TELNET console to configure the IP address
- Using the Brother Web BRAdmin server software for IIS* to configure the IP address
- Installation when using Web Services (For Windows Vista® users)
- Installation when using a Network Print Queue or Share
- Appendix B
- Index