Canon XEED SX6000 - Manual (Page 116)

Selecting an Image Quality
116
Noise Reduction
[Noise reduction]
You can reduce image noise.
MENU > [Image adjustment] > [Advanced
adjustment] > [Noise reduction]
Press the OK button to accept your setting
and then press the MENU button or EXIT
button (WX6000 / SX6000).
• The factory default for HDMI (when [HDMI
In] ( P127 ) is set to [Auto]) is [Off] and
when Component is used, it is set to
[Weak].
• Noise reduction may produce motion arti-
facts when projecting fast-moving images.
• Select [Weak] for fast-moving images.
Select [Strong] for slow-moving images.
• The adjustment you have made is stored
as adjusted values for the input signals
and image mode of the current projection.
• When [HDMI In] ( P127 ) is [Computer], this
setting is not displayed.
Dynamic Gamma
[Dynamic gamma]
You can adjust the gradation representa-
tion of light and dark portions of an image
automatically.
MENU > [Image adjustment] > [Advanced
adjustment] > [Dynamic gamma]
Press the OK button to accept your setting
and then press the MENU button or EXIT
button (WX6000 / SX6000).
• The factory default settings are [Off] when
the connected equipment is a Computer
(ANALOG PC, DIGITAL PC, HDMI (when
[HDMI In]
( P127 ) is [Computer])) and
[Weak] when the connected equipment is
AV equipment (COMPONENT, HDMI
(when [HDMI In] (
P127 ) is [Auto])).
• The adjustment you have made is stored
as adjusted values for the input signals
and image mode of the current projection.
HDMI Component
Digital PC Analog PC
Off Disables noise reduction.
Weak
Middle
Strong
Specifies the intensity of the noise
reduction in three steps.
HDMI Component
Digital PC Analog PC
Off Dynamic gamma is disabled.
Weak
Middle
Strong
Specifies the intensity of the
dynamic gamma in three steps.