Canon XEED SX6000 - Manual (Page 141)

141
User’s Manual
Settin
g
Functions from Menus
Checking Projector Information
[Information]
You can check information about the
signal types of the images projected and other
information.
Information shown
* Not displayed when network functions are [Off].
HDMI Component
Digital PC Analog PC
Item Meaning
Model name WUX5000 / WUX4000 / WX6000 / SX6000
Input signal Details of the input signal currently selected
Information such as the signal type, signal resolution, and frequency
is displayed.
Firmware Current firmware version
Serial No. Serial number unique to this projector
IP address* IP address of the projector ( P175 )
Gateway address* IP address of the gateway device ( P175 )
E-mail sender address* Sender e-mail address used for sending error mails ( P183 )
E-mail recipient
address* Displays [Already set] or [Not set] to show whether a recipient e-mail
address has been set for receiving error mails. (
P183 )
Projector name* Name which identifies this projector on the network
Location* Location where the projector is installed
System information ID System information. Normally this is not displayed.
MENU > [Information] MENU > [Information]