Setting a network password, Registering a network password, P173 – Canon XEED SX6000 User Manual

Page 173: Network settings on the projector, Registering a network pass- word

Advertising
background image

173

Network Settings on the Projector

Installation Manual

Connecting to a Networ

k

Setting a Network Password

You can set whether or not a password is
required in order to change the projector
network settings.

MENU > [Network Setting] > [Network Pass-
word setting]

Press the

OK button to accept your setting

and then press the

MENU button or EXIT

button (WX6000 / SX6000).

• [On] is the factory default.

Registering a Network Pass-
word

Register the projector network password.

MENU > [Network Setting] > [Register Network
Password]

When [Register Network Password] is
selected, the window shown below
appears.
Enter a 4 digit password.
For the WUX5000 / WUX4000, the pass-
word can be entered using the [ ] / [ ] /
[ ] / [ ] buttons. For the WX6000 /
SX6000, the password can be entered
using a combination of the numerical but-
tons and the [ ] / [ ] / [ ] / [ ] buttons.
[ ] / [1], [ ] / [2], [ ] / [3], and [ ] / [4]
have the same function.

Press the

OK button to accept your setting

and then press the

MENU button or EXIT

button (WX6000 / SX6000).

• The factory default is [ ] [ ] [ ] [ ]

(WUX5000 / WUX4000) or

[1] [1] [1] [1]

(WX6000 / SX6000).

Off

A network password is not used.

On

A network password is used.

Advertising