Canon XEED SX6000 - Manual (Page 181)

181
Configuring the Network From the Computer
Installation Manual
Connecting to a Networ
k
The error meanings are as shown below.
Error Meaning
Input error A setting outside the valid range was set on the
setting screen.
Password setting error The set password and confirmation password did
not match.
Invalid SMTP The SMTP server IP address has not been set.
System failed to connect SMTP
server. Failed to connect to the SMTP server when send-
ing a test mail.
System failed to connect POP3
server. Failed to connect to the POP3 server attempting to
send a test mail.
System doesn't support this auth
type. An authentication type was set which is not sup-
ported by the server.
System failed to authenticate. Authentication failed attempting to send a test mail.
The system failed to send the test
mail. Sending of test mail failed due to a connection fail-
ure with the SMTP server or an error which does
not ordinarily occur.
Save Failed Mismatch in settings occurred when settings were
changed at the same time from multiple comput-
ers.