Canon XEED SX6000 - Manual (Page 30)

Preparing the Remote Control
30
■When a remote control is connected using a cable (WX6000 / SX6000)
The remote control for WX6000 / SX6000 (RS-RC05) can be used connected to the pro-
jector with a cable.
Use a cable with a Ø3.5 mm stereo mini jack (not included).
• Infrared operations cannot be performed if a cable is connected to the projector or the
remote control.
• Use a cable with a Ø3.5 mm stereo mini jack (not included) with a length of 30 m or less.
Ø3.5 mm stereo mini jack cable
(not included)
Terminal for
wired remote
control