Canon XEED SX6000 - Manual (Page 39)

39
Part Names
Before Use
■LED Indicator Displays
The LED indicators flash or illuminate to indicate the operating status of the projector.
* Either the [POWER ON] or [STAND BY] indicator illuminates, depending on the power
status.
: Off : Lit : Flashing
LED indicator
Operating status
POWER
ON
(green)
STAND BY
(red)
WARN-
ING (red)
LAMP
(orange)
TEMP
(red)
Power is not connected.
Ready to turn power on (standby).
Power is on.
Power-saving mode engaged.
* * The time for replacing the lamp is near.
Internal temperature is high.
A lamp error has occurred.
Power was turned off due to high inter-
nal temperature.
The lamp cover is open.
Another error has occurred.