Part names – Canon XEED SX6000 User Manual

Page 41

Advertising
background image

41

Part Names

Before Use

(1)LAN port (

P166

)

Connects the LAN cable.
Used to connect the projector to a network.

(2)ANALOG PC-1 / COMPONENT IN terminal

(

/COMPONENT IN) (

P47

,

P53

)

Receives the analog PC signal (Analog PC-1).
A component cable can be used to receive the component image signal (Component).

(3)ANALOG PC- 2 / DVI-I IN terminal (

DVI-I IN) (

P50

)

Connects the external monitor output from a computer.
Receives the digital PC signal (Digital PC) or analog PC signal (Analog PC-2).

(4)HDMI IN terminal (HDMI IN) (

P51

)

Receives the digital content image signal (HDMI).
Carries both video and audio signals across a single cable.

(5)Service port (CONTROL)

This terminal is used by servicing technicians. It is not used during ordinary use.

(6)Terminal for wired remote control (REMOTE) (

P30

)

This terminal is used to connect the remote control using a cable.

(7)AUDIO IN terminal (AUDIO IN) (

P47

,

P50

,

P53

)

Receives the audio signal input for 2 kinds of image input except HDMI IN.
The internal speaker outputs the audio for the selected image signal.

(8)AUDIO OUT terminal ( AUDIO OUT) (

P51

,

P55

)

Outputs the audio to external AV equipment. This outputs the audio signal that corre-
sponds to the projected image signal.

(1)

(2)

(3)

(4)

(5)

(6)

(7)

(8)

Advertising