Canon XEED SX6000 - Manual (Page 46)

46
Steps for Connecting the Projector and Projecting an Image
Connecting the Projector to Equipment ( P162 )
Starting Projection ( P56 )
Selecting an Input Signal ( P59 )
Adjusting the Image ( P61 )
Make the following adjustments.
• Setting the Display Resolution of the Computer (
P61 )
• Selecting an Aspect Ratio of Projected Image (Screen aspect) and a Screen
Mode (Aspect) ( P63 , P69 )
• Adjusting Misaligned Images or Flickering of the Screen Using the Auto PC ( P62 )
• Adjusting the Image Size ( P71 )
• Adjusting the Focus ( P73 )
• Adjusting the Image Position (Lens shift) ( P74 )
• Adjusting Keystone Distortion ( P76 )
Making Fine Adjustments
• Selecting an Image Mode (
P78 )
Do you want to project an image from a
notebook computer?
Is the image projected properly?
No
For a notebook computer,
turn on the monitor output
(
P58 ) and then proceed.
No
Yes
Projection is complete.
Yes
Installation work should be performed by a qualified technician.
Contact the Canon Customer Support Center for further information.