Canon XEED SX6000 - Manual (Page 58)

Starting Projection
58
■When the Password Input Screen Appears
If you have set a password, the Password input screen appears. Enter your password.
(
P128 )
■When “No signal” Appears
With a notebook computer, the user must turn on the external monitor output. ( P58 )
Press the INPUT button to select the input signal. ( P60 )
■When Notebook Computer Screen Does Not Appear
Set your notebook computer to output signals to an external monitor. For more details,
refer to “Changing Notebook Computer Screen Output” below.
■Adjusting Image
• Set the display resolution of the computer to the highest resolution or the resolution
closest to that setting. ( P61 )
• Use the auto PC function to adjust shift in computer image or the flickering of the
screen. ( P62 )
• Use the ZOOM button to adjust the size of the projected image. ( P71 )
• Use the FOCUS button to correct the focus adjustment if necessary. ( P73 )
• Use the D.SHIFT/KEYSTONE button (WUX5000 / WUX4000) or KEYSTONE button
(WX6000 / SX6000) to adjust keystone correction if necessary. ( P76 )
• Select the aspect ratio of the projected image (screen aspect) or a screen mode
(aspect) according to the aspect ratio of the screen, type of input image signal etc.
(
P63 - P70 )
• Select an image mode depending on the projected image. ( P78 )
Changing Notebook Computer Screen Output
With a notebook computer, the user must turn on the external monitor output on the com-
puter side.
This operation is not required for a desktop computer.
■Turning on External Monitor Output
You can turn on the external monitor output via keyboard operation.
To turn on the external monitor output with most computers, press the function key ([F1] to
[F12]) which is marked with the external monitor icon while holding down the [Fn] key.
• The function key you use and the method used to turn on the external monitor output vary
depending on the model. For details, see the manual for your notebook computer.
• With Windows 7, you can turn on image output by holding down the Windows logo key
and pressing the [P] key.
While pushing key Press a key such as or .