Canon XEED SX6000 - Manual (Page 137)

137
Setting Various Functions
User’s Manual
Settin
g
Functions from Menus
Filter Warning Display
[Filter warning display]
A message advising you to perform clean-
ing can be set to display when the filter
needs cleaning.
MENU > [Install settings] > [On screen] > [Filter
warning display]
Press the OK button to accept your setting
and then press the MENU button or EXIT
button (WX6000 / SX6000).
• The factory default is [On].
Resetting the Air Filter
Counter
[Filter counter]
This resets the counter which reminds you
of the time for cleaning and replacing the
air filter.
MENU > [System settings] > [Other settings] >
[Filter counter]
If the OK button is pressed on [Filter
counter], the air filter counter is displayed.
Select [Reset] and press the OK button.
[OK] is selected on the confirmation
screen and the
OK button is pressed, the
air filter counter is reset.
Press the
MENU button or EXIT button
(WX6000 / SX6000).
HDMI Component
Digital PC Analog PC
Off The filter warning display is not
displayed.
On The filter warning display is dis-
played.
HDMI Component
Digital PC Analog PC
For details about how to replace or
clean the filter, refer to
page 193 .