Canon XEED SX6000 - Manual (Page 150)

150
Selecting the Projection Method and Installation Location
■Ceiling Mounting or Rear Projection
You can mount the projector on the ceiling (ceiling mounting) with it turned upside down
or place it behind the screen (rear projection) if you use a translucent screen.
Make sure to use the optional ceiling attachment. For the ceiling attachment, refer to
page 231 .
■Adjusting the projection position when installed on the floor
To adjust the projection position when the projector is installed on the floor, use the lens
shift function (
P74 and P160 ) to adjust up / down / left / right. You can also use the adjust-
able feet to incline the projector upward by up to 6°. For information about the relationship
between screen size and projection distance, refer to
page 156 .
When the projector is inclined upwards, the projected image will be distorted into a trape-
zoid shape. This can be corrected by using the keystone correction. (
P76 )
Ceiling Mounting Rear Projection
Adjust-
able feet
Lens shift