Canon XEED SX6000 - Manual (Page 36)

Part Names
36
■RS-RC05
POWER button ( P56 , P80 )
Turns the projector on or off.
IMAGE button ( P79 )
Switches the image mode (image quality).
Pointer buttons ( P90 )
Selects the upper, lower, left or right item
in the menu. Performs remote control
channel settings when the remote control
is used via the infrared transmitter. (
P124 )
OK button ( P92 )
Determines the item selected from the menu.
ZOOM button ( P71 )
Adjusts the image size.
[ ] / [ ] buttons: Increase the image size.
[ ] / [ ] buttons: Decrease the image size.
FOCUS button ( P73 )
Adjusts focusing.
[ ] / [ ] buttons: Moves the focus position further away.
[ ] / [ ] buttons: Moves the focus position nearer.
ASPECT button ( P70 )
Changes the aspect ratio mode.
Ch button ( P124 )
Changes the remote control channel when
the remote control is used via the infrared
transmitter.
D.ZOOM button ( P84 )
Zooms the image in or out digitally.
[1] button: Zooms the image in (up to 12x).
[4] button: Zooms the image out (1x minimum).
[ ] / [ ] / [ ] / [ ] buttons: Move the zoom-in
location.
TEST PATTERN button ( P138 , P217 )
Displays the test pattern.