Canon XEED SX6000 - Manual (Page 93)

93
User’s Manual
Settin
g
Functions from Menus
Setting Display Status
Selecting an Image Pro-
jection Mode
[Aspect]
You can select a projection mode corre-
sponding to the aspect ratio of the image.
(
P69 )
MENU > [Display settings] > [Aspect]
MENU > [Input settings] > [Aspect]
• Different contents are displayed for differ-
ent screen aspects or input signal types.
• The ASPECT button on the remote control
can also be used to select the Aspect set-
tings.
Press the OK button to accept your setting
and then press the MENU button or EXIT
button (WX6000 / SX6000).
HDMI Component
Digital PC Analog PC
Auto An image is projected at the
aspect ratio of the input signal.
Select this mode for normal image
projection.
Full (WUX5000 / WUX4000)
The image is projected using an
input signal aspect ratio of 16:10.
Select this to project computer
screen images with an aspect ratio
of 16:10 (WUXGA, WSXGA+,
WXGA+ and WXGA (1280 x 800))
fully on the screen.
16:10 (WX6000 / SX6000)
The image is projected using an
input signal aspect ratio of 16:10.
16:9 The image is projected using an
input signal aspect ratio of 16:9.
Select this if an image of 16:9
aspect ratio cannot be correctly
projected in [Auto] mode.
4:3 The image is projected using an
input signal aspect ratio of 4:3.
Select this if an image of 4:3
aspect ratio cannot be correctly
projected in [Auto] mode.
Zoom This cuts the upper/lower or left/
right part of the screen according
to the screen aspect and zooms in
or out of the center of the image.
Select this if a letter box is dis-
played (black lines at the top/bot-
tom of the screen) when using
video software.
True size
The image is projected with the origi-
nal resolution of the input signal.
Select this to clearly project a computer
screen image that has a resolution of
WUXGA and lower (WUX5000 /
WUX4000), WXGA+ and lower
(WX6000) or SXGA+ and lower
(SX6000).
This can only be selected when
the screen aspect is 16:10.
There may be some cases when
this cannot be selected, depend-
ing on the input signal and/or reso-
lution.
There may be some cases when
this cannot be selected, depend-
ing on the input signal and/or reso-
lution.