P. 6-25 – Canon VB-M600VE User Manual

Page 103

Advertising
background image

Intelligent Function Setting Tool

6

-25

6

A

d

min T

o

ol

s

such as in the Admin Viewer, the control privileges will

be obtained the moment the Intelligent Function

Setting Tool is launched.

(6) [Focus]

Focus can be operated if the control privileges have

been obtained. Focus operations are the same as in

the Admin Viewer. For details, see “Setting the Focus”

(p. 7-15).

If the [Lock camera position] checkbox is selected,

focus cannot be operated.

(7) [Smart Shade Control]

Smart shade control can be operated if the control

privileges have been obtained. Smart shade control

operations are the same as in the Admin Viewer. For

details, see “Setting the Smart Shade Control”

(p. 7-14).

If the [Lock camera position] checkbox is selected,

smart shade control cannot be operated.

(8) [Display Options]

Select the [Detection Area] or [Detection Results] you

want to show in the image display area from the

following items.

• [Selected Detection Settings Only]

Show the detection areas or detection results only

for those detection settings selected in the

[Detection Setting List].

• [All Detection Settings]

Show the detection areas or detection results for all

detection settings in the [Detection Setting List].

• [Detection Settings of the Same Type]

Show the detection areas or detection results for

the same type of detection settings as those

selected in the [Detection Setting List].

• [Do not display]

No detection areas or detection results are shown.

(9) [Restart intelligent function]

If the background image has changed while you were

specifying settings or detection results are not as set,

etc., click this button to restart the intelligent function.

If camera control privileges are not obtained, this

function is grayed out.

(10)[Lock camera position] checkbox

Select this checkbox to move the camera position to a

preset position selected from the preset selection box

and lock it there. Lock the camera position when

specifying detection settings to obtain a correct

detection result.

If camera control privileges are not obtained or a

preset position has not been set, this function is

grayed out.

(11)Camera position selection box

Select the camera position from the view restriction

presets or the home position. Use the Preset Setting

Tool to set presets or the home position (p. 6-16).

If camera control privileges are not obtained, the

[Lock camera position] checkbox is not selected, or a

view restriction preset position has not been set, this

function is grayed out.

(12)[Detection Setting List]

A list with the specified detection settings is shown.

(13)[Add]

The [New Detection Settings] dialog box is shown and

detection settings can be added.

(14)[Delete]

Delete detection settings selected from the [Detection

Setting List].

(15)[Detection Setting Number], [Detection Type]

The detection setting numbers and detection types

selected from the [Detection Setting List] are shown.

(16)[Enable these detection settings] checkbox

Select this checkbox to enable the detection settings

that are selected in the [Detection Setting List].

(17)[Detection Criteria] tab, [Event] tab

Switch between the Detection Criteria and Event tabs.

• [Detection Criteria]

Specify detection settings name, detection area,

and detection criteria (p. 6-27).

• [Event]

Specify operations to be performed when events

occur (p. 6-28).

(18)[Restore settings]

Clear the settings you have specified on the screen of

the tool and restore the settings saved in the camera.

(19)[Save settings]

Save the edited detection settings in the camera.

After the detection settings have been specified, be

sure to save the settings in the camera by clicking

[Save settings].

Important

It takes tens of seconds for the intelligent function to restart. No

detection is performed while restarting.

Advertising
This manual is related to the following products: