Setting intelligent function detection settings, P. 6-27), P. 6-27 – Canon VB-M600VE User Manual

Page 105

Advertising
background image

Intelligent Function Setting Tool

6

-27

6

A

d

min T

o

ol

s

Setting Intelligent Function Detection
Settings

„ Setting Detection Criteria ([Detection

Criteria] tab)

Set detection criteria while operating the camera and

checking the image in the image display area.

(1) [Detection Settings Name]

You can use up to 64 characters in a detection setting

name. Be sure to enter a single-byte alphanumeric

detection setting name.

In a [Detection Settings Name], ASCII characters

(spaces or printable characters) can be used.

(2) [Area Shape]

Select [Rectangular] or [Polygonal] for the shape of

detection areas you want to set in the image display

area.

For details on detection area setting operations, see

“Setting Detection Criteria per Detection Type”

(p. 6-29).

[Clear]
If the [Area Shape] is [Polygonal], the detection area

set in the image display area is deleted.

(3) [Display Color]

Choose the color of the detection setting. The color

selected here becomes the display color of the

detection area in the image display area.

Important

Notes on intelligent function settings and operation

• When setting intelligent function, do an actual detection test

to confirm that detection will be performed correctly.

• When the brightness of the entire screen suddenly changes,

the detection may be delayed for up to 5 minutes.

• If [Auto] is used in [Day/Night] settings, and automatic

switching between [Day Mode] and [Night Mode] is

performed, [Restarting intelligent function. Please wait.] is
shown and intelligent function will restart. Detection will not

be performed while intelligent function is restarting.

• Do not set detection areas in the On-screen Display area.

• Movements of subjects are not detected in privacy mask

areas.

• If the camera is operated during intelligent function setting or

operation, [Restarting intelligent function. Please wait.] is

shown and intelligent function will restart. Detection will not

be performed while intelligent function is restarting.

• Set intelligent function again if the angle of view is changed

through camera operation, or the camera position of a preset
or home position is changed using Preset Setting Tool.

• If [Status] in [Detection Setting List] is [Enabled] when the

camera position is fixed, control privileges cannot be

obtained by VB Viewer or RM. Also, the preset tour will no

longer run.

Difficult-to-detect Subjects

• Objects or portions where there is little contrast in color or

brightness with the background may not be detected.

• Small objects and changes on the screen may not be

detected.

• Partial or entire changes in light on the screen may trigger

detection.

• If multiple objects overlap, the detection status may change.

(1)

(3)

(4)

(2)

[Detection Criteria] tab

Image Display Area

Detection Area

Advertising
This manual is related to the following products: