Canon VB-M600D - Manual (Page 34)

3
-6
You can specify the storage period of the recorded
images and the maximum disk usage.
Display the [Servers] Tab
The [Servers] tab is displayed in the [Settings] dialog
box.
➀ List of Storage Servers
Display a list of Storage Servers.
➁ [Add], [Edit], and [Remove]
Edit a Storage Server. [Add] or [Remove] are not
available with RM-Lite.
➂ [Recorded Video Settings]
Specify the minimum and maximum storage period for
recorded images.
➃ [Close]
Close the dialog box.
„ Specify the Storage Period for Recorded
Images
You can specify the storage period for images recorded
on the Storage Server.
• Select the [Ensure video is kept for at least] check box
to specify the minimum storage period. Select the units
(days or weeks) of the storage period and enter the
number of days (1 to 90) or weeks (1 to 12).
• [Ensure video is kept for upto] is always enabled. You
cannot disable it. Select the units (days or weeks) of
the storage period and enter the number of days
(1 to 90) or weeks (1 to 12).
Change the Destination of the Recording File
and the Maximum Disk Usage
Specify a drive for recording or change the maximum disk
usage.
Click [Do not limit] for each drive to display the
maximum disk usage. Select the [Maximum Disk
Space Used] check box and specify a maximum disk
usage that does not exceed the total disk capacity.
Configure a Storage Server
1 Click [Settings] > [Storage Servers].
➃
➀
➂
➁
Important
Depending on the maximum disk usage setting for the Storage
Server (P. 3-6), recordings may not be stored for the full storage
period specified in this setting.
1 Select a Storage Server from the list of Storage
Servers.
2 Click [Edit] to display the [Storage Server Settings]
dialog box.
3 Clear the check boxes next to the drives that are not
used for recording.
4 Specify the maximum disk usage.