Canon VB-M600D - Manual (Page 95)

9
-9
T
roubles
hoot
ing
9
12017 The operation was canceled, usually because the handle on
which the request was operating was closed before the
operation completed. The communication was canceled. (This error does not
indicate a problem and may be generated during normal
operation.)
12029 The attempt to connect to the server failed. The connection to the camera failed. (Normally, 12002 is
generated.)
12030 The connection with the server has been terminated. The connection to the camera has been aborted. (The
disconnect process itself is recorded when it executes
normally.)
12031 The connection with the server has been reset. The connection to the camera has been reset.
Event Information
Event Information Displayed Message
Record Now [Manual Recording Started] or [Manual Recording Stopped]
Recording [Recording Started] or [Recording Stopped]
Change in the recording frame rate [Recording Frame Rate reduced due to high load issues] or [Reverted to the
Recording Frame Rate due to resolution of high load issues]
Low Disk Space Warning [Warning: Files deleted due to low disk space]
Delete recorded files (when disk space is insufficient) [Delete recorded files (when disk space is insufficient) started] or [Delete
recorded files (when disk space is insufficient) stopped]
Delete recorded files (when disk space is low) [Delete recorded files (when disk space is low) started] or [Delete recorded files
(when disk space is low) stopped]
Suspending/Resuming Recording [Recording Suspended] or [Fixed: Recording Resumed]
Camera Communications Error [Error: Cannot Connect to Camera] or [Connection to Camera Fixed]
Storage Server Starting/Stopping [Storage Server Started] or [Storage Server Stopped]
Code Error Message Possible Cause