Canon LV-7392A - Manual (Page 39)

Computer Input
39
Computer Input
Aspect Setting
(For LV-8227A, LV-8227M)
This projector has the picture screen resize function, which enables you to customize the image size.
Aspect Menu
Provide the image to fit the screen size.
Normal
True
Provide the image in its original size. When the
original image size is larger or smaller than the
screen size (1280 x 800), the projector enters
to the panning mode automatically. Use the
Point ▲▼◄► buttons to pan the image.
When adjusted, the arrows will turn blue. When
reached to the correction limits, the arrows will
disappear.
Full
Provide the full screen image.
 Note:
• This projector cannot display any resolution
higher than 1920 x 1200. If your computer’s
screen resolution is higher than it, reset the
resolution to the lower before connecting to the
projector.
• The image data in other than 1280x800 is
modified to fit the screen size in initial mode.
• 16:9, True and Digital zoom +/– are disabled
and cannot be displayed when 480i, 575i, 480p,
575p, 720p, 1035i or 1080i is selected in the PC
System Menu (p.31).
• When True is selected in the Screen menu,
Digital zoom +/- can not be selected.
1
2
Press the MENU button to display the
On-Screen Menu. Use the Point ▲▼
buttons to select Screen and then press
the Point ► or the OK button.
Use the Point ▲▼ buttons select the
desired item and then press the OK button .
Custom
Provide the last stored aspect screen image.
16:9
Provide the image at the 16:9 wide screen ratio.
Adjust the screen scale and position manually
with this function. Press the Point ► button at
Custom adj. and the Custom adjustment menu
is displayed on the screen, you can use the
Point ▲▼ buttons to choose the item you want
to adjust.
Scale H/V ...... Adjust the Horizontal/Vertical
screen scale.
H&V ............... When set to On, the aspect
ratio is fixed. The Scale V
appears dimmed and becomes
unavailable. Adjust Scale
H, then the screen scale is
automatically modified based
on the aspect ratio.
Position H/V .. Adjust the Horizontal/Vertical
screen position.
Common ....... Save the adjusted scale or
position to all the inputs. Press
the OK button at Common
to display a confirmation box.
To save the scale or position,
press the OK button at “Yes”.
When Custom is selected,
the saved scale or position is
used.
Reset ............. Reset the all adjusted values.
Press the OK button at Reset
to display a confirmation box.
To reset, press the OK button
at “Yes”.
Custom adj.
 Note:
• When no signal is detected, Normal is set
automatically .
• The adjustable range for Scale H/V and
Position H/V is limited depending on the input
signal.
Zoom
Scale the image proportionally to fit the entire
screen. Either side of image may go over the
screen.
Custom adj.