Canon RC-V100 - Manual (Page 11)

11
En
White balance and master black controls
21 AWB (automatic white balance) button
Changes the white balance adjustment to automatic mode.
When the camcorder is set to automatic white balance, the button lights up in orange.
22 A / B (custom white balance A / B) buttons
Each of these butons changes the white balance to one of the custom white balance
settings stored as A or B, respectively.
When custom white balance A or B is selected, the corresponding button lights up in
orange.
23 Å (set custom white balance) button
After selecting one of the custom white balance settings (A or B), press this button to
have the camcorder register the custom white balance value.
When custom white balance A or B is selected and the white balance value has not yet
been registered, the button will flash slowly in red. While the custom white balance is
being adjusted, the button will flash quickly. When the procedure is correctly
completed, the button’s light will go out; if there is an error, it will flash slowly again.
Now, when this button lights up (constantly on) in red, it indicates a fine adjustment to
one of the preset white balance settings (see the following explanation).
24 PRESET (preset white balance) button
Changes the white balance to the preset white balance or color temperature setting
that was selected in the camcorder.
While a preset white balance or the color temperature setting is selected, the button
will light up in orange.
• To fine-tune a preset white balance setting or set the color temperature
1. While the PRESET button is lit up in orange, press the Å button.
The button will light up in red.
2. Fine-tune the preset settings (-9 to +9) or set the desired color temperature with
the Up/Down buttons (navigation buttons).
3. Press the Å button again to set the selected value.
The Å button’s light will go out.
21
22 23
24
25 26
27 28
COP
Y