Active button, master pedestal and iris controls, Cop y – Canon RC-V100 User Manual

Page 13

Advertising
background image

13

En

32 FOCUS dial

When the focus mode is set to manual focus, this dial adjusts the focus.
By default, the operating mode of the dial is set to relative mode (A 16). You can
change the direction in which you need to turn the dial and its sensitivity to your
preference (A 16).

ACTIVE button, master pedestal and iris controls

33 ACTIVE button

This button locks all or part of the buttons and dials on the remote controller in order to
prevent their operation by mistake. When all the controls are active, the button lights
up in green.
By default, immediately after activating the remote controller, all the controls will be
locked. Press the ACTIVE button repeatedly to change the key lock mode in the
following order:
All controls locked

J All controls active J Only master pedestal and iris controls active

J Only zoom/focus controls active J All controls locked

NOTES

• Immediately after selecting the All controls active mode and in other situations, the

ACTIVE button may flash momentarily. During that time, the controls cannot be
used; please wait until the button lights up in green to use the remote controller.

34 MASTER PEDESTAL dial

This dial adjusts the master pedestal level.
By default, the operating mode of the dial is set to relative mode (A 16). You can
change the direction in which you need to turn the dial and its sensitivity to your

35 EXTENDER (extender in use) indicator

This indicator lights up in orange when a lens extender is being used. This can be an
EF Extender attached to the lens or the digital tele-converter function activated on the
camcorder.

33

34

35 36

37

38

COP

Y

Advertising