Canon VB-M700F - Manual (Page 66)

66
Note
When [Night Mode] is enabled in [Aperture Mode], both the
displayed and recorded video is in black and white.
„ Adjust the Focus and Speed
You can use the [Focus and Speed] tab in the [Advanced
Camera Settings] dialog box to adjust the focus and the
pan/tilt/zoom speeds.
[Focus and Speed] tab
(1) [Auto], [Auto (for domes)]
Automatically focus the video.
Use [Auto (for domes)] for cameras equipped with an
indoor dome housing. The setting prevents the
camera from focusing onto the dome surface.
(2) [Fixed at infinity]
Fix the focal point at infinity.
(3) [Manual]
Adjust the focus manually by clicking the [Far] or
[Near] button.
Click [One Shot AF] to focus once on the current
subject and then return to manual focus.
(4) [Pan/Tilt]
Specify the pan/tilt speed ([Slow], [Normal] or [Fast]).
(5) [Zoom]
Specify the zoom speed ([Slow] or [Fast]).
The focus cannot be adjusted.
The pan/tilt speed is unavailable.
When the digital zoom on the camera is set to [Disable],
the zoom speed is unavailable.
„ Configure External Outputs
Use the [External Outputs] tab on the [Advanced Camera
Settings] dialog box to configure output to external
devices connected to the camera.
(1) [Off]
Disable the external output.
(2) [On]
Enable the external output.
Important
If you select [Enabled] for Night Mode, you will not be able to
set the white balance. If you select [Auto] for Night Mode,
however, you will be able to set the white balance, but those
settings will be cleared when the camera switches to Night
Mode.
Important
The settings may be different for different camera models. For
details, see the camera manual.
(1)
(3)
(2)
(4)
(5)
(1) (2)