Canon VB-M700F - Manual (Page 78)

78
Configure the Recording Mode
„ Continuous Recording Settings
(1) [Aspect Ratio]
Specify the aspect ratio ([4:3] or [16:9 (4:3)]).
If you select [Not specified], the camera’s aspect ratio
setting is used for recording.
(2) [Resolution]
Specify the resolution when [Aspect Ratio] is set to
[4:3] or [16:9 (4:3)].
If you select [Not Specified] for the [Resolution], the
camera’s resolution setting is used for recording.
(3) [Video Format]
Specify the video format ([JPEG], [MPEG-4] or
[H.264]).
The available formats depend on the camera model.
(4) [Maximum Frame Rate]
Specify the maximum frame rate (number of frames
recorded in one second) in the range from 0.1 to 30
frames per second (fps).
(5) [Record audio if available]
Select this check box if you want to record audio
together with the video.
(6) [Advanced]
Displays the [Advanced Recording Settings] dialog
box. For details, see “Configure the Advanced
Recording Settings” (p. 84).
(7) [Use the recording-mode stream]
Enable the recording stream function. With this
function, the camera temporarily stores the video in its
own memory before sending it to the Storage Server.
This can help reduce the effects of non-uniform
network traffic (jitter).
• [4:3] cannot be selected for the [Aspect Ratio]
• Only [480Ч270 (320Ч180 / 320Ч240)], [960Ч540
(640Ч360 / 640Ч480)], and [1920Ч1080 (1280Ч720 /
1280Ч960)] can be selected for [Resolution]. If a
resolution for a 720p or 4:3 category video is set on the
camera, the video will be recorded at the resolution
listed in parentheses.
• The resolution that can be selected in [Resolution]
depends on the [Aspect Ratio] setting. When [Aspect
Ratio] is [4:3], only [320x240] is available and when it is
[16:9 (4:3)], [480x270 (320Ч180 / 320Ч240)], [960x540
(640Ч360 / 640Ч480)] and [1920x1080 (1280Ч720 /
1280Ч960)] are available.
• The resolutions that appear on the screen in
parentheses will not be used.
• You cannot select [MPEG-4] for the [Video Format].
When [H.264] is selected, [Aspect Ratio] and
[Resolution] are fixed at [Not Specified] and cannot be
changed.
• When using [Use the recording-mode stream], JPEG
video is recorded to the camera’s SD memory card
when the network connection is interrupted. The frame
rate of the recording is 1 fps. For details, see the
camera manual.
You cannot select [16:9 (4:3)] for the [Aspect Ratio].
• You cannot select [16:9 (4:3)] for the [Aspect Ratio].
• You cannot select [H.264] for the [Video Format].
• You cannot select [1280x960] and [1920x1080] for the
[Resolution].
The VB-C50Fi does not support [Record audio if
available].
• You cannot select [MPEG-4] or [H.264] for the [Video
Format].
• [Use the recording-mode stream] is unavailable.
1 Click [Continuous Recording] in the recording mode
list and select the check box.
2 Configure the video recording settings.
(1)
(3)
(4)
(5)
(6)
(2)
(7)
Important
• The size of the recording data increases as the resolution
and frame rate become higher. Make sure there is sufficient
hard disk space available before specifying a higher
resolution and frame rate.
• If you select [MPEG-4] or [H.264], the [Storage Server] option
in [Detect Motion Using] cannot be selected.