Save part of a recording, P. 100), Exit viewer ptz – Canon VB-M700F User Manual

Page 100

Advertising
background image

100

„ Exit Viewer PTZ

Double-click anywhere within the Viewer PTZ panel.

The preview frame is cleared, and the display returns to

the original video.

To exit Viewer PTZ from all video windows at the same

time, right-click the Viewer PTZ panel and select [End

Viewer PTZ (all video windows)].

Note

Even when the Viewer PTZ panel closes, Viewer PTZ operation

continues.

Save Part of a Recording

You can save a part of a recording with a length of up to

one hour to a file.

(1) [From] and [To]

Specify the date and time of the start and end

positions.

(2) [Include audio if available] check box

Clear the check box if you do not want to include

audio in the file.

(3) [OK] and [Cancel]

Close the dialog box.

The [Save As] dialog box appears.

Note

Extracted video is saved in QuickTime movies (with the .mov file

extension) and can be played with QuickTime (or other players

that support the .mov file type). We recommend that you use
QuickTime Version 6.5.1 or later.

1

Select a recording on the timeline.

2

Click [Extract] on the timeline to display the [Extract

Video] dialog box.

3

Specify the time range for the video to be extracted.

4

Click [OK].

5

Specify the file name and storage location and click
[Save].

(1)

(3)

(2)

Important

• You can extract a video from only one video window at a

time.

• Do not specify the Windows folder or the Program Files folder

on the system drive as the destination. Video cannot be

saved to these folders.

• You cannot save only audio data.

• When extracting a time range that contains different video

formats (such as JPEG and H.264), divide the range by

format and save each video segment individually.

• When the data size of video being extracted reaches 2 GB,

extraction will stop and the video extracted to that point will
be saved, even if the specified end time has not been

reached.

Play back the .mov file to check if the specified length of
video was saved.

When data size is expected to exceed 2 GB, divide the

extraction time range. Refer to “Data Size and Bit Rate

Estimates” (p. 25), and calculate the estimated data size.
– Calculating time in minutes to 2 GB (JPEG)

2,097,152 KB/(data size per frame (KB) x recording frame

rate (fps) x 60 sec.)

– Calculating time in minutes to 2 GB (H.264/MPEG-4)

2,097,152 KB x 8/(bit rate (Mbps) x 1024 x 60 sec.)

Specify the video extraction time range so it is within the
calculated time estimation.

• Block noise may appear when a video recorded in H.264 and

saved in .mov format is paused during playback using

QuickTime.

Advertising
This manual is related to the following products: