Settings after installation, Windows firewall settings, Ee “windows firewall settings” (p. 37) – Canon VB-M700F User Manual

Page 37: See “settings after installation” (p. 37)

Advertising
background image

37

S

et

u

p

2

Configure the following settings after installing this

software according to the operating system you are using:

(

3: Required,

: Not required)

Windows Firewall Settings

If you install the Storage Server and the Viewer on

different computers, you must change the Windows

Firewall settings on the computer used for the Storage

Server.

The changes to the settings are already complete if you

selected the [Add storage server programs to the

Windows Firewall exception list.] check box during

installation. If you did not select the above check box

during installation, perform the following procedure to

change the Windows Firewall settings.

The following settings are not required if you install the

Storage Server and Viewer onto the same computer.

„ When using Windows 7, Windows 8, Windows

Server 2008 R2, or Windows Server 2012

„ When using Windows Vista or Windows Server

2008

If the [Control Panel] is set to [Classic View], double

click [Windows Firewall].

If the [User Account Control] dialog box is displayed,

click [Continue].

Settings After Installation

Windows 7,

Windows Vista

Windows Server

2008, Windows

Server 2008 R2,

Windows 8,

Windows Server

2012

Windows Firewall
Setting

3

3

Security Level
Setting

3

Sound Settings for
Using the Audio
Feature

3

Warning When
Viewer Starts

3

3

1

Click [System and Security] in the [Control Panel], and
then click [Windows Firewall].

2

Click [Advanced Settings] to display the [Windows
Firewall with Advanced Security] window.

3

Click [Inbound Rules] and select [New Rule] from the

[Action] menu to start the [New Inbound Rule Wizard].

4

Click [Port], and then click [Next].

5

Click [TCP] and [Specific local ports], and then enter
80 as the port number. Then click [Next].

6

Click [Allow the connection], and then click [Next].

7

Click [Next].

8

Enter a name (such as the Storage Server or Storage
Server Group name) in [Name] and click [Finish].

9

The added inbound rule should be displayed in the
[Windows Firewall with Advanced Security] window,

with a checkmark icon displayed next to the rule.

1

Click [Start] > [Control Panel] to open the [Control
Panel].

2

Click [System Security] > [Windows Firewall].

3

Click [Change settings].

4

Click the [Exceptions] tab and click [Add Port].

5

In the [Add a Port] dialog box, enter the name of the

Storage Server and 80 as the port number. Make sure
that [TCP] is selected and click [OK].

6

Confirm that the added Storage Server is now
displayed in the [Windows Firewall] dialog box and that
the check box is selected. Then, click [OK].

Advertising
This manual is related to the following products: