Canon VB-M700F - Manual (Page 32)

3
-2
Use the Camera Angle Setting Tool to adjust the camera angle when installing the camera or to change the capture
orientation according to the situation.
You can set zoom, focus and exposure compensation*.
You can set pan, tilt, rotation, zoom, focus and exposure compensation.
* The exposure compensation (P. 7-12) set with the Camera Angle Setting Tool or Admin Viewer is reset when the camera is
rebooted. To set exposure compensation when the camera starts, set [Exposure Compensation] from [Camera] - [Initial
Camera Settings] in the Setting Menu (P. 5-9).
Launching the Camera Angle Setting Tool
Launch the Camera Angle Setting Tool by double clicking
on the [Camera Angle Setting Tool] icon located on the
desktop or by selecting [All Programs] > [WebView
Livescope] > [Camera Angle Setting Tool] from the [Start]
menu.
Connecting to the Camera
The Camera Angle Setting Tool is not connected when the
camera starts. Connect to the camera through the
following operations.
The [Connection settings] dialog box will appear.
[Host Name]
Enter the host name or IP address of the camera (P. 2-5).
Setting the Camera Angle
Important
• The Camera Angle Setting Tool is bundled for angle adjustment during camera installation only and is not intended for daily use.
Overuse may cause the camera to malfunction.
• After changing settings in the Camera Angle Setting Tool, check the settings in the Setting page and Admin Tools operate as intended.
• The Camera Angle Setting Tool cannot be used via a proxy server.
• Upload functions cannot be used while the Camera Angle Setting Tool is connected.
VB-M700F
VB-M600D VB-M600VE
1 Click [Connect] from the [File] menu.
2 Enter each item for the camera to connect to and click
[OK].