Performing maintenance -32, Tool” (p. 5-32) in the setti, P. 5-32) – Canon VB-M700F User Manual

Page 76: Ars (p. 5-32), In the event log (p. 5-32)

Advertising
background image

5

-32

Tool

1

[View Logs]
Display a history of camera operations and

connections to each viewer, etc.

2

[View Current Settings]
Display a list of current settings.

3

[Reboot]

The camera is rebooted.

4

[Restore Settings]

Discard user-defined settings and restore all setting

items to factory default settings except camera

administrator password, network setting, date, time,

time zone, SSL certificate and encrypted

communications. Executing this operation will reboot

the camera automatically.

Note

• It is recommended that you write down all current setting

values before restoring factory default settings in [Restore
Settings] (P. 8-23).

• The camera can be restored to factory default settings using

the reset switch as well. Note, however, that this will reset all
camera settings to factory default settings except for date and
time (P. 8-22).

[Maintenance]
Viewing Event Logs and Current Settings and Performing Maintenance

The following items can be used here.

• Tool

Display or Initialize Camera Settings

Caution

You must not turn off the camera while it is
performing the [Restore Settings] operation. Turning
off the camera at this stage may result in making it

unable to boot correctly.

Advertising
This manual is related to the following products: