Assigning a channel for remote control, E remote control, P113 – Canon XEED WUX450 User Manual
Customizing System Operation (System Settings)
Assigning a Channel
for Remote Control
> [System settings] >
When using multiple projectors at
the same time (maximum 4), you can
assign a different channel to each
remote control so that each operates
Selecting the Projector Channel
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• The factory default is [Independent] for both
projector and remote control.
• After changing the channel on the menu, be
sure to change the channel of the remote
• If a cable is connected, it is not necessary
to perform remote control channel setting.
To Unlock Key Lock Function
Turn off the projector and unplug the
power plug. Hold down the OK button on
the main unit and plug in the power cord,
as you continue to hold down the OK
button. In a moment, a beep will sound,
and the controls will be unlocked.
Select the remote control
channel to use with this
Independent Remote controls set to any
channel can be used.