Canon XEED WUX450 - Manual (Page 146)

146
Installation-Related Menu Settings
Locking Installation
Settings
> [Install settings] > [Positional lock]
Operation of installation related
functions can be prohibited.
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• The factory default is [Off].
• Locking applies to the following settings:
screen aspect, keystone adjustment, digital
image shift, horizontal/vertical image flip,
and professional settings.
Flipping Image
Display
> [Install settings] > [Image flip H/V]
Select this setting if you want to
hang the projector from the ceiling
or project an image from behind the
screen.
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• [None] is the factory default.
HDMI Component LAN
Digital PC Analog PC USB
Off The positional lock is not used.
On Installation related functions cannot
be used.
HDMI Component LAN
Digital PC Analog PC USB
None Select this to project an image
normally.
Ceiling
mounted Select this to project an image
with the projector hung from the
ceiling.
The projected image is inverted
in both vertical and horizontal
directions.
Rear Select this to project an image
from behind the screen.
The projected image is inverted
in the horizontal direction.
Rear,
Ceiling
mounted Select this to project an image
from behind the screen with the
projector hung from the ceiling.
The projected image is inverted
in the vertical direction.