Completing computer settings, Setting projector information [projector info – Canon XEED WUX450 User Manual

Page 190

Advertising
background image

Completing Computer Settings

190

Setting Projector Information [Projector info.]

From [Projector info.] in the settings screen, you can set the names and location
names which are used to identify projectors when multiple projectors are installed
on the network. For the setting procedure, refer to “Displaying the Network
Configuration Screen” (

P181

).

Item

Explanation

Factory default setting

SNMP

Select the SNMP function version. If
OFF is selected, the SNMP function
will be turned off and the other
settings in this screen cannot be
changed.

OFF

Receive community

Enter the community name which will
receive projector information in 1-byte
alphanumeric characters and symbols
(1 - 15 characters).

<Blank>

Password

Enter the community settings
password in 1-byte alphanumeric
characters and symbols (8 - 15
characters). It can be set only when
the SNMP version is V3.

<Blank>

Confirm password

For confirmation, enter the same
password as you entered in
[Password].

<Blank>

Item

Explanation

Factory default setting

Projector name

Enter the projector name in 1-byte
alphanumeric characters and
symbols (1 - 63 characters).

Canon Projector001

Location

Enter the projector installation location
in 1-byte alphanumeric characters and
symbols (0 - 63 characters).

<Blank>

Some characters such as # cannot be used for [Projector name] and [Location].

Advertising